Dynamos from Hawker Electrical

Motorcycle Dynamo Reconditioning Services

Our reconditioning service is available for all Lucas and Miller motorcycle dynamos. Each unit is tested on arrival in order to ascertain the original reason for failure. We ask customers to supply the regulator they intend to use with the dynamo so we can test this and return the units as a working pair. All dynamos are finished as closely as possible to the original appearance and extensively tested. The work carried out will ensure the best performance and long term reliability. If you wish to convert to 12 volts we can help and advise you with this. All works carry a 2-year guarantee.

Applications

Lucas CS35

Fitted to the Ariel Square 4 and Royal Enfield, all services are available for the CS35 dynamo with service exchange units available. If you are thinking of converting to 12 volts contact us first for help and advice.

Lucas E3L – E3N – E3H

During full reconditioning the armature, field, coil, bearings, brushes, springs and through bolts are all replaced. The unit is blue printed to give maximum efficiency.

Lucas MC 45

Known as the pancake dynamo, this dynamo is fitted to the Sunbeam S7 and S8. Some post war Scotts were fitted with a version of this unit. We have all the specialist equipment and knowledge to rework these successfully. If you are thinking of modernising your electrical system and considering converting to an alternator, we can help as we have developed a complete kit with full instructions ready to fit straight onto your sunbeam.

Miller DVR-D6

Mainly fitted to Vincents and Velocettes the performance of these units can be greatly improved with careful assembly. They are configured to work with a Lucas type cvc or electronic equivalent whilst retaining the original finished. We can also supply a regulator that will fit inside of the original Miller cartridge case together with the case if required.

BSA A7/A10 Performance Dynamo Belt Kit

During our quest to improve electrical systems we have developed a belt drive kit for the A7/A10 dynamo, It was specifically designed to increase the dynamo speed from 2.4:1 to 3.2:1 putting the dynamo at it's optimum speed for both 6 and 12 volt operation.